Resources
Safety Brief
A safety brief for print operators, focused on inks, solvents, ventilation, lifting, heaters, moving parts, and routine floor hazards.
How the safety brief applies on print floors
The Safety Brief is written for operators working around large-format printers, inks and heated parts. It covers solvents, ventilation, lifting, moving assemblies and the routine hazards that build up during a busy shift. Keep it close to the floor where FastJET, Stormjet and Skywalker machines are actually run.
Start with the ink set, ventilation points, and any heat source near the printer. Solvent handling changes between a Gauteng workshop with dust at the doors and a coastal room where humidity hangs around the machine. A safety brief for FastJET, Stormjet, and Skywalker operators should note extraction, PPE, and where waste rags are kept.
Take a photo of the printer area before the shift gets busy. Include heater zones, walkways, chemical storage, and the emergency stop position in the same record. That gives the operator and supervisor one reference when a lamp cover is missing or a spill needs to be traced back.
Hazards around wide-format printers
A short written brief can stay near the machine and be checked during handover. It should list daily checks, unsafe conditions, and who must be told if ventilation drops or moving assemblies are exposed. A useful safety note is specific to the printer, the inks, and the room where work happens.
Add the machine name, the ink type, and the work area ventilation before sending it through the contact form. Note any curing lamps, bulk solvent containers, lifting points, and trip risks around FastJET, Stormjet, or Skywalker units. If one hazard keeps returning, mention when it occurs and what was being printed at the time.
- Ventilation checks near solvent printers
- Heater and lamp risks recorded
- Photos attached with machine details
Conditions seen in South African print rooms
A workshop in Johannesburg may deal with dust entering through roller doors, while Durban sites often watch moisture and solvent odour build-up in closed areas. Smaller production rooms can also have extension leads, packed media racks, and narrow trolley routes close to heated parts. The brief should reflect the actual site, not a generic poster from another trade.
Load-shedding changes shutdown routines, especially where heaters need time to cool and heads must be parked correctly. Staff should know where torches, spill materials, gloves, and extinguisher points are kept before the next outage arrives. When lifting ink boxes or media rolls, write down the team lift rule used on site.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
What to capture in the brief
Note ventilation, ink handling, curing lamps, moving parts and any hazards already identified around the printer. Add site photos and use a direct subject line.
Record ventilation status, PPE used, housekeeping issues, and any guard or cover that is out of place. Keep the note with shift records or maintenance paperwork so recurring hazards can be seen over time. Site photos help when the same printer has different risks on day and night shifts.
What our Colour Management customers say
Verified Google reviews